The New School Of Nutritional Medicine

The Iron Story, Part 3: Your Iron Blood Tests

Welcome to Part 3 of The Iron Story!

In Part 1, we followed iron from your dinner plate into the bloodstream and looked at why eating more iron isn’t always the answer. In Part 2, we opened the iron larder (ferritin), met the body’s recycling team (macrophages) and discovered that most of the iron we use every day comes from within. Yes, that is correct. Yet you may be ‘stocking’ up on iron-rich foods and seeing no change in your blood test results.

Your iron larder (ferritin) can also be empty (low), full (high reading), or full with the doors firmly locked!

So how do you know what’s actually going on? This is where blood tests and other If you have ever been told, ‘your blood tests are normal’, not ‘normal’ or not yourself, then you have already discovered one of the reasons functional testing has become so popular. Functional tests are designed to provide additional information about how the body is functioning. They may explore areas such as hormones, digestion, nutrient status, fatty acids, the microbiome, genetics, metabolism, or stress physiology. Think of them as gathering more pieces of the health puzzle, ideally before a dis-ease ‘shows up’.  Sadly, most people turn to functional tests, once they have a dis-ease. Referenced in 35 articlesClick to read more → come in handy. Have you ever looked at an iron blood test report and wondered what all those numbers mean? Ferritin, serum iron, transferrin, TIBC, TSAT. It is quite the Scrabble challenge! Don’t worry, we are going to break it down for you, so much so that you may know more than your doc!

Two people can have elevated ferritin, yet one may have inflammation restricting iron availability and the other may have excess iron accumulating due to hereditary haemochromatosis. Hereditary haemochromatosis is particularly common among people of Irish ancestry. It is most often associated with variants in the HFE gene, particularly C282Y, which can disrupt the body’s ability to regulate iron absorption through the hormone hepcidin.

If hereditary haemochromatosis is suspected, ferritin and transferrin saturation (TSAT) are useful initial blood tests, followed by HFE genetic testing where appropriate.

Can you see why looking at one marker, as in ferritin in this case, can be misleading? Ferritin, from two different people, raised for different reasons. It’s always important to look beyond a single marker. So although there is a lot of ‘hype’ around ferritin, it is important to look beyond just ferritin.

If you like bullet point summaries, then here is the skinny on this blog: 

  • Ferritin: Your iron larder, although inflammation or genetics can influence the reading.
  • Serum iron: How much iron is circulating in your blood, attached to transferrin.
  • Transferrin: Your iron delivery service.
  • TIBC: The total capacity of your delivery service to carry iron.
  • TSAT: How much of that carrying capacity is actually occupied by iron.
  • Haemoglobin: Helps us understand whether oxygen-carrying capacity is affected.
  • Copper and ceruloplasmin: Important members in mobilising and transporting iron.
  • HTMA: Explores mineral concentrations and relationships in hair, but cannot replace blood tests for assessing iron status.
  • The bigger picture: Iron status is influenced by absorption, losses, inflammation and YOUR physiology.

If you like the full-fat version… keep reading.

Iron profile blood test

An iron profile is a collection of blood markers that helps us understand iron availability, transport and storage.

A typical iron profile includes ferritin, serum iron, transferrin or total iron-binding capacity (TIBC), and transferrin saturation (TSAT).

A full blood count provides additional information about red blood cells and haemoglobin.

These markers tell us different stories. Some tell us about storage, others about transport, availability or whether iron deficiency has started affecting red blood cell production. To make matters more complex, they don’t always ‘agree with each other’.

1. Ferritin – your iron larder

We spent quite some time with ferritin in Part 2, so we’ll keep this brief. Ferritin is a Protein is one of the three main macronutrients, alongside fats and carbohydrates, yet for many years it was often the forgotten member of the trio. More recently, protein has become something of a celebrity in the nutrition world, appearing in everything from snack bars and cereals to coffee and desserts. Whilst the marketing can sometimes get a little carried away, the truth is that protein is essential for human health. Every cell in the body relies on it. Protein helps build and repair tissues, supports immune function, forms enzymes and hormones, transports nutrients, and helps maintain muscle mass, particularly as we age.Referenced in 38 articlesClick to read more → that stores iron safely within cells. A small amount is found in the bloodstream, and this is what your serum ferritin blood test measures. Generally, low ferritin suggests depleted iron reserves.

However, high ferritin is a tad more nuanced, because ferritin is also an acute-phase reactant, meaning it can rise during inflammation and certain other physiological conditions. Therefore, a high ferritin result doesn’t automatically mean you have too much iron, it may indicate inflammation somewhere.

Imagine two people with elevated ferritin.

Person A has chronic inflammation. Their hepcidin levels may be increased, restricting iron release from storage. Their ferritin is elevated, but circulating iron availability may be low.

Person B has hereditary haemochromatosis, a condition in which excessive iron absorption can lead to iron accumulation in tissues. Their ferritin may be elevated because iron stores are genuinely increased.

Raised ferritin can also occur with liver disease, alcohol excess, Metabolism is not a calorie-burning furnace that sits somewhere near your belly button, deciding whether you can fit into last year's jeans. Metabolism is the set of chemical processes taking place inside your body every second of every day, keeping you alive.Referenced in 39 articlesClick to read more → dysfunction and other conditions. Also, someone can have genuinely depleted iron stores alongside inflammation that makes ferritin appear higher than expected. So how do we begin to distinguish these situations? You may be asking. The answer is ‘looking at the other markers’. It is never about one marker. Ask the question, ‘what else is going on and WHY?’

2. Serum iron – what is circulating?

Serum iron measures the amount of iron circulating in the blood bound mainly to transferrin. Serum iron can fluctuate during the day and can be affected by recent iron intake, supplements, time of the month, illness and inflammation.

A single low serum iron result doesn’t necessarily mean your iron stores are low. Remember hepcidin, our iron boss? When hepcidin rises, less iron is released into circulation, hence, serum iron may fall even when stored iron is present.

As with ferritin, iron needs to be interpreted alongside the other markers.

3. Transferrin – the iron delivery service

Remember transferrin from Part 2? It is the protein that transports iron through your bloodstream (trans as in transport and ferrin as in iron), particularly to the bone marrow, where new red blood cells are made. Transferrin is like a fleet of delivery vehicles. Each transferrin molecule has two potential iron-binding sites.

When the body senses depleted/very low iron stores, the liver produces more transferrin, increasing the capacity to collect and transport available iron. Conversely, transferrin levels may fall during inflammation, liver disease or inadequate protein availability.

Therefore, transferrin tells us something about the body’s iron transport system. You may be asking, ‘How do I know how much iron is being carried by these vehicles?’ This brings us to TIBC (Total Iron Binding Capacity).

4. TIBC – how much iron can your delivery service carry?

Imagine a delivery fleet with 100 available seats for iron. TIBC tells us the fleet’s total carrying capacity, not how many seats are currently occupied. Transferrin is the main iron-binding protein in blood, TIBC largely reflects transferrin availability.

Hence, when iron stores are depleted/low, TIBC often rises as the body increases its iron-carrying capacity. During inflammation, the liver can make less transferrin and TIBC may fall.  So TIBC gives us another piece of the puzzle.

Now, we come to the question ‘How many of those seats are occupied by iron?’  TSAT (Transferrin Saturation) tells us what percentage of the available iron-binding capacity is occupied by iron.

5. TSAT – how full are the delivery vehicles?

TSAT stands for Transferrin Saturation and indicates how many of the ‘seats’ are occupied. This tells us what percentage of the available iron-binding capacity is occupied by iron. Imagine your transferrin delivery fleet has 100 seats, and 20 seats are occupied by iron. Your transferrin saturation is 20%. Simple percentage calculation. If 50 seats are occupied, your saturation is 50%.

The calculation is: TSAT (%) = Serum iron ÷ TIBC × 100

(When serum iron and TIBC are expressed in the same units.)  TSAT helps us understand how much iron is available relative to the blood’s iron-carrying capacity. A low TSAT may suggest that insufficient iron is available for tissues, including the bone marrow.

A persistently elevated TSAT can raise suspicion of iron overload, particularly when considered alongside ferritin and other findings. A TSAT around 45% or above may warrant further investigation for haemochromatosis, depending on the clinical circumstances.

But remember, TSAT is calculated using serum iron and TIBC, both of which can be influenced by your physiology and illness.

6. Haemoglobin – oxygen transport?

Iron is essential for haemoglobin, the protein in red blood cells that carries oxygen around the body. When iron deficiency progresses, the body may eventually struggle to produce enough haemoglobin, which can result in iron deficiency anaemia. BUT, you can have iron deficiency without being anaemic.

Your ferritin may be low while haemoglobin remains within the laboratory reference range. This is because the body can draw upon its stored iron before haemoglobin production becomes significantly affected. A full blood count can provide additional clues through markers such as:

  • MCV: The average size of your red blood cells.
  • MCH: The average amount of haemoglobin within each red blood cell.
  • RDW: How much your red blood cells vary in size.

In established iron deficiency anaemia, red blood cells may become smaller and contain less haemoglobin. However, these changes are not exclusive to iron deficiency. Conditions such as thalassaemia can also affect red blood cell readings. Also, if you are deficient in iron and vitamin B12, your red blood cell size can appear deceptively normal, but iron deficiency tends to produce smaller red blood cells, whilst B12 deficiency can produce larger ones. Hence, we do not look at one blood marker in isolation, we look at patterns.

Here are the iron blood profiles of two individuals. Both have low iron stores, but only one has developed iron deficiency anaemia. The other has low iron stores alongside a vitamin B12 deficiency, yet their haemoglobin and MCV remain within the normal reference ranges.

Can you see why looking at ferritin alone doesn’t tell us the whole story?

* Ferritin of 17 µg/L may indicate iron deficiency despite falling within the printed reference interval. UK clinical guidance often considers ferritin below 30 µg/L suggestive of low iron stores.

A normal haemoglobin or MCV does not exclude iron or vitamin B12 deficiency.

Although there is currently a great deal of attention around ferritin and the recently updated reference ranges, it is important to remember that ferritin does not work alone. It is part of a much larger, interconnected system involving iron absorption, storage, recycling, transport and utilisation. Each of these processes is influenced by your individual physiology and internal environment.

The question isn’t just whether ferritin is low or high, but WHY. 

Throughout this blog, we have focused primarily on iron, without delving into the roles of copper, zinc or even vitamin A. Yet these nutrients also play important roles in how the body absorbs, transports and utilises iron. A reminder that no nutrient works in isolation.

Stay in the loop! Make sure you’re on our newsletter list so you don’t miss the next instalment.

To health!

From the team at the New School of Nutritional Medicine.

Share this article
Fresh from The New School of Nutritional Medicine

Keep the learning going

Join our free newsletter for thoughtful insights on nutrition, wellbeing and natural medicine, plus the latest news from The New School of Nutritional Medicine.

Subscribe for free
Shopping cart0
There are no products in the cart!
Continue shopping
0